HEX ezCAN PURE Universal Accessory Manager ezSWITCH Accessory Controller Optional Plug & Play Harness

Description The HEX ezCAN PURE lets you power and operate connected accessories. but with an extra helping of unlimited possibility! Model-specific HEX ezCANs listen for proprietary CAN-bus control inputs only, while the HEX ezCAN PURE listens for electrical On/Off control inputs, making it compatible with most 12-volt motorcycles, cars, SUVs, pickups, 4x4s, agricultural vehicles, and more. Additional ezBUS Low-Power Output (JWPF Connector)The HEX ezCAN PURE Universal Accessory Manager also features an extra low-power ezBUS circuit connection via a JWPF connector. When the white circuit is configured as an ezBUS-Ready accessory in the HEX ezCAN configuration software, riders can connect ezBUS-Ready accessories to the white circuit and connect an additional low-power ezBUS accessory to the dedicated JWPF output—such as an ezSWITCH. —- Included in the box: 1x HEX ezCAN PURE Device 1x HEX ezCAN Generic Signal Input Harness (input cables for ignition, high beam, horn, brake, and left & right turn signal) 4x 15mm length adhesive heat shrink (6.4 mm ⌀) 1x 40mm length adhesive heat shrink (9.5 mm ⌀) 1x 1.4m length of automotive braid (4mm ⌀) 1x 1.4m length of automotive braid (6mm ⌀) 6 x Posi-tap 1x USB C Cable 4x 2-wire stub connectors (Black/Orange) 4x 1-wire terminal wires (Orange) 4x Blanking seals 3x Blanking Plugs 20x Cable Ties   HEX ezCAN PURE INSTALLATION INSTRUCTIONS – USING THE SUPPLIED GENERIC SIGNAL HARNESS:   While the HEX ezCAN PURE Universal Accessory Manager can be used on its own on any motorcycle that operates on a 12v electrical system, for a quicker and simpler installation, HEX ezCAN has developed a range of Optional Plug & Play Harnesses for selected popular motorcycle models. These pre-made harnesses connect directly to the bike’s existing factory connectors, allowing the HEX ezCAN PURE to access the motorcycle’s signal triggers without cutting or modifying the original wiring loom. Each Optional Plug & Play Harness is designed to work exclusively with the HEX ezCAN PURE Universal Accessory Manager and supports a specified range of motorcycle models. The harness does not function on its own and is not compatible with other HEX ezCAN devices. Please check whether a compatible harness is available for your motorcycle. HEX ezCAN PURE Optional Plug & Play Harness, support list: CFMOTO 001: CFMoto 450 (2024 )   PLUG & PLAY HARNESS – HONDA 001: Honda CRF 300L (2021-24) / CRF 300L with the LED headlight (2025 ) / CFR 300L Rally (2021 )   PLUG & PLAY HARNESS – HONDA 002: Honda XL750 Transalp (2023 )   PLUG & PLAY HARNESS – KOVE 001: Kove 800X (2024 ) Kove 800X Rally (2025 ) Kove 800X Pro (2026 ) Kove 800X Touring (2026 )   PLUG & PLAY HARNESS – KTM 001: KTM 390 Adventure R / 390 Adventure X / 390 Enduro R (2025 )   PLUG & PLAY HARNESS – ROYAL ENFIELD 001: Royal Enfield Himalayan 450 (2024 )   PLUG & PLAY HARNESS – YAMAHA 001: Yamaha Tenere 700 (2025 ) HEX ezSWITCHES Accessory Controllers are available in four variants, each with a different telltale LED lights – BLUE, GREEN, YELLOW, and RED. The HEX ezSWITCH is a compact, handlebar-mounted button with a built-in LED indicator. It’s a versatile smart switch that connects directly to the HEX ezBUS ‘white’ circuit, allowing you to control various accessories connected the user’s same Accessory Manager. SEE HOW TO INSTALL A HEX ezSWITCH HERE:   —