The installation went relatively quick, once I determined the location of the holes to be drilled in the side cases! Tapping into the existing wiring using the Posi-Taps was easy. I’ll give 5 stars for the quality of the kit itself and the functions of the LED array for the rear, brake, & turn signal lights. Excellent brightness and definitely adds a huge amount increased visibility from the rear. 2 things, I think, could use some improvement, and why I gave 4 stars: 1) The cable plug that goes from the controller to the chassis receptacle (on side case) should either be a right angle or the kit should include a right angle adapter and 2) There should be an intermediate connector between the controller and the cable plug, because: A right angle cable plug (or adapter) to mate with the right angle chassis receptacle would allow the cable to dress closely along the side of the case and be less apt to be accidentally snagged by something and possibly breaking. The area on the inside facing area of the outside portion of the case is relatively out-of-the-way, but, accidents do happen! And, if that cable plug does get damaged, the array on that side could no longer be functional. So, questions is, seeing as that cable goes directly to the controller: How to repair that without buying an entire new controller with cable and wiring leads (or try to do makeshift repairs myself)? If there was an additional junction between the existing cable plug and the controller and (that cable section) could be purchased as a repair part, this would definitely be an easier fix.
